How to Install a Relè With Three Pulsanti: A Step-by-step Guide
Are you looking to install a relè with three pulsanti in your home or office? Look no further! In this article, we will guide you through the process of installing a relè with three pulsanti, step by step.
What is a Relè And What Does it Do?
Before we dive into the installation process, let’s first understand what a relè is and what it does. A relè is an electromechanical component that acts as a switch or relay. It can be controlled by a separate circuit and has three types of contacts: Normally open (NO), normally closed (NC), and common (C). The relè works by using a coil to create a magnetic field that moves the contacts, thereby controlling the flow of electricity.
What You Will Need
To install a relè with three pulsanti, you will need the following:
- A relè with three pulsanti
- Three pulsanti (or switches)
- Cable ties
- Electrical wire (black, blue, and brown)
- A screwdriver
- Wire strippers
Step 1: Feed The Relè
Before installing the relè, you must feed it with electrical power. To do this:
- Identify the cable of phase (usually black or brown) and neutral (usually blue) resulting from the main switchboard.
- Cut a piece of electrical wire (brown or black) to connect the contact NO-1 on the relè to the phase cable.
- Use a screwdriver to unscrew the morsetto on the contact and insert the cable. Tighten the morsetto securely.
Step 2: Connect The Neutral Cables
Now, let’s connect the neutral cables:
- Identify the resulting neutral cable of the light bulb that the three pulsanti will control.
- Cut a piece of electrical wire (blue) to connect the contact NC-1 on the relè to the neutral cable.
- Use a screwdriver to unscrew the morsetto on the contact and insert the cable. Tighten the morsetto securely.
Step 3: Connect The Pulsanti
Next, let’s connect the pulsanti:
- Identify the resulting neutral cables of all three pulsanti, as well as the lamp and main switchboard.
- Cut a piece of electrical wire (blue) to connect the contact C-1 on the relè to each of these cables.
- Use a screwdriver to unscrew the morsetto on the contact and insert the cable. Tighten the morsetto securely.
Step 4: Connect The Final Cable
Finally, let’s connect the final cable:
- Cut a piece of electrical wire (blue) to connect one of the pulsanti to the contact A2 on the relè.
- Use a screwdriver to unscrew the morsetto on the contact and insert the cable. Tighten the morsetto securely.
Step 5: Test The Relè
Now that you have installed the relè with three pulsanti, it’s time to test it:
- Turn on the main switchboard.
- Check that the light bulb is turned off when none of the pulsanti are pressed and turns on when one or more of them are pressed.
Conclusion
Installing a relè with three pulsanti can seem daunting, but with these step-by-step instructions, you should be able to do it yourself. Remember to always follow safety precautions when working with electrical components, and if you’re unsure about any part of the process, consider consulting a professional electrician.
What is Next?
In our next article, we’ll explore other topics related to electrical installations, including how to install a smart home system and how to wire a ceiling fan. Stay tuned!
Products Mentioned in This Article
- Relè with three pulsanti: Amazon Link
- Screwdriver: Amazon Link
- Wire strippers: Amazon Link
Note: The products mentioned above are Amazon affiliate links, and we earn a commission if you purchase them through these links.




